Neat and well-groomed nails have long been part of the everyday look. Modern trends in manicure help to quickly and safely put them in order, but each hand needs an individual approach. For this reason, the masters have ceased to dwell on one processing option, preferring to combine techniques.
What is a combined manicure?
The presented type of nail care is a successful combination of two methods. Combi-manicure is a combination of hardware and classical (edging) technique. Main features:
- dry nail treatment, without soaking and baths;
- maximum “purity of results”, both cuticle and pterygium are removed;
- no risk of cuts and damage to the side bolsters.
There are 3 basic options for processing nail plates:
- Classic manicure. The trimming technique allows you to achieve the most accurate result, remove the entire cuticle and films, and clean the side rollers with high quality. The main disadvantage is the need to soak the nails in the bath, which makes it difficult to apply gel coatings.
- European manicure technique. Gentle way to remove cuticles. It is not cut off, as in the classics, but softened with a special compound and pushed away with a wooden stick. The main disadvantage is not enough “clean” result, the need to repeat the procedure often.
- Hardware manicure. Dry and safest nail treatment. All manipulations are performed with a device with different nozzles, which minimizes the risk of skin damage and infection. The disadvantage is the inability to completely remove the cuticle and pterygium, small flaws remain.
What is the difference between a hardware manicure and a combined one?
Each technique has significant disadvantages, so the craftsmen began to combine the methods of processing plates. Combined manicure – an interweaving of the classical and hardware approach. This technique combines the advantages of these options, eliminating the disadvantages. Main differences:
- In the hardware technique, the cuticle is removed with cutters, while the combined manicure involves the use of nippers or scissors.
- Standard operation of the device is limited to a few basic nozzles. Hardware combined manicure requires an extensive set of cutters. This helps to qualitatively lift the cuticle, deepen the base of the nail, remove pterygium and films on the sides.
Combined manicure – pros and cons
The disadvantages of the considered type of work with plates are not too many. A combined manicure for a novice master or for home use is expensive and requires certain skills. You will have to buy a good device and an extended set of nozzles, learn how to professionally use wire cutters. It is advisable to additionally purchase a sterilizer and a hood.
Benefits of a combined manicure:
- dry processing, nails do not absorb moisture;
- minimal risk of injury and cuts;
- perfect cuticle and pterygium removal;
- the ability to lengthen the working surface of the plate;
- easy and reliable laying of gel polish.
What is needed for a combined manicure?
Professional nail treatment will require a financial investment, even if it is supposed to be done at home. Combi manicure for beginners involves a less extensive shopping list and modest spending, but it is better to immediately purchase high-quality equipment and components. This will help you save money on repairs and consumables in the future.
Tools for combined manicure
The main thing that you need to buy is a device for processing nails. You should not save on it, even if you plan to perform a combined manicure only for yourself and at home. The milling cutter must be of high quality and reliable, with a guarantee and the ability to freely purchase components that fail. List of tools for combined manicure, consumables:
- wire cutters or sharp scissors;
- pusher and orange sticks;
- files of different abrasiveness and polishing buffs;
- cotton pads;
- cuticle oil.
Manicurist will additionally need:
- disinfectant for tools;
- gel polish remover;
- “caps” for nails;
- disposable gloves;
- gel polishes.
Cutters for combined manicure
Most devices come with a standard set of nozzles. To do the right combined manicure, you will need to acquire several additional ones. They will provide high-quality raising of the cuticle for its complete removal with wire cutters. Cutters for combi manicure:
- rectangular elongated (narrow);
- grinders (soft).
How to do a combined manicure?
Having experience in the processing of nail plates, it is easy to perform the described procedure, it will not take much time. Beginners should watch a few video tutorials on how to do a combined manicure, practice and “fill your hand”. Each time the result will improve, and the quality of nail processing will become significantly higher. The main thing is to practice.
Stages of combined manicure
The nail treatment scheme is simple, it varies depending on the presence of the coating. The main stages of the combined manicure:
- removing varnish (if any);
- disinfection and degreasing of hands and nails;
- giving the plates the desired length and shape;
- pushing back the cuticle;
- elevation of excess skin and pterygium;
- removal of dead tissue;
- processing of side rollers;
- nail polishing;
- applying gel polish, if a combined manicure with a coating is done;
- use of care products (cuticle oil, hand cream).
Combined manicure – execution technique
Experienced masters select the intensity of exposure and the sequence of stages for a particular client, because everyone’s skin has different sensitivity and density. An individual approach is formed on the basic methodology by which a combined manicure is performed, technique:
- Remove varnish residue. Thoroughly disinfect, degrease and dry the nail.
- Make corrections to the length and shape of the plate. Highly abrasive files are used.
- Gently push back the cuticle with a pusher or orange sticks. It is important not to damage the skin, avoiding breaks and cracks.
- Use a “needle” to remove the pterygium. Finally raise the cuticle with a “flame” cutter.
- “Needle” to move the side rollers. Process them with a rectangular elongated cutter, remove all dry areas. Additionally, “walk” with a spherical nozzle.
- Work out the edges under the cuticle and in the corners of the base of the nail with a “bullet” cutter.
- Cut away any raised skin with sharp wire cutters or scissors. If pterygium remains, remove it with a narrow rectangular cutter.
- Treat the skin with a soft silicone nozzle.
- Polish the nail with a low-abrasive file or buff.
- If you planned a combined manicure without a coating, finish the procedure by rubbing in caring oil. In other cases, this stage is performed after applying the gel polish and design.